Home > IEC Test Equipment >

IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine

Product Categories

IEC Test Equipment [128]
Flammability Testing Equipment [63]
Ingress Protection Test Equipment [103]
Impact Testing Machine [67]
Plug Socket Tester [138]
Helium Leak Testing Equipment [40]
Test Finger Probe [84]
Electrical Appliance Tester [140]
Cable Testing Equipment [61]
Audio Video Test Equipment [53]
Tensile Strength Testing Machine [13]
Compression Testing Machine [17]
Switch Tester [18]
Light Testing Equipment [29]
Automatic Brazing Machine [10]
Battery Testing Equipment [20]
Appliance Performance Test Lab [9]

Guangzhou HongCe Equipment Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine

Brand Name : HongCe

Model Number : CL-4

Certification : TUV、ITS、CSA、BV、SGS 、CNAS(cost additional)

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : T/T

Supply Ability : 50 set/ month

Delivery Time : 25 Days

Packaging Details : Plywood

Power Supply : AC220V, 50Hz

Test Speed : (10±2)r/min

Timer Range : 0-99 hours 59 minutes

Working Stations : 2 working stations

Test Height : 260, 280, 300, 320mm (Adjustable)

Rotating Radius : 35mm

Contact Now

IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine

Product details:

This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage. The testing times can be preset before the test, and the compliance stops automatically with the alarm when the testing times are reached.

Technical parameters:

Item	Parameters
Power Supply	AC220V, 50Hz
Test Speed	(10±2)r/min
Timer Range	0-99 hours 59 minutes
Working Stations	2 working stations
Test Height	260, 280, 300, 320mm (Adjustable)
Rotating Radius	35mm
Rotating Weight	0.3,0.4,0.7,0.9,1.4,2.0kg, each for 2 pieces
Pulling Weight	30N, 40N, 50N, 60N each for 2 pieces
Bushing Hole Diameter	Φ6.5mm, Φ9.5mm, Φ13mm, Φ14.5mm, each for 2 pieces.
Dimensions	1110mmX405mmX1320mm.
Environmental Requirements	0 ~ 40℃, Relative humidity ≤80%.

Values for flexing under mechanical load test for copper conductors

Nominal cross-sectional area of conductor (mm²)	Diameter of bushing hole ( mm)	Height (mm)	Mass for conductor (kg)
0.5	6.5	260	0.3
0.75	6.5	260	0.4
1.0	6.5	260	0.4
1.5	6.5	260	0.4
2.5	9.5	280	0.7
4.0	9.5	280	0.9
6.0	9.5	280	1.4
10.0	9.5	280	2.0
16.0	13.0	300	2.9
25.0	13.0	300	4.5
35	14.5	320	6.8
The height:±15mm. If the bushing-hole diameter is not large enough to accommodate the conductor without binding, a bushing having the next larger hole size may be used.

Maintenance and Precautions:

1. Bushing and weight should be kept clean and dry in non-working time, if necessary, painted with oil and seal.

2. The bearing parts should be lubricated periodically, and the whole unit should be kept clean.

3. Pay attention to safety when carrying the heavy weights.

Product Tags:

iec testing equipment

laboratory test equipment

IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Guangzhou HongCe Equipment Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!